Pro-Meter 2K Series - Metering, Mixing & Dispensing Systems

With an innovative design and tough construction, the Pro-Meter 2K Series metering and dispensing systems won’t let you down when you need to get the job done, even with abrasive and heavily filled products. Accurately dispense a very wide range of 2 part adhesives & resins such as Polyurethane & Epoxy Resin, Methyl Methacrylate (MMA) as well as sealants like Silicone, Acrylic and Thermal Paste.

Based on Archimedes principle, Positive Rod Displacement metering proportions materials to the exact volumetric ratio time and time again; even with notoriously "difficult to meter" materials with abrasives that can cause machine wear. Pro-Meter keeps you in production and on-ratio day after day, providing accurate metered shots or precise beads or resin, no matter the application needs.

Air-Over-Oil Drive - Can be used to dispense shots of an infinite dispense volume, using a totalizing program, where the meter dispenses multiple shots per stroke of the meter, until the dispense volume is achieved. Air-Over-Oil also allows for “jogging” through a dispense volume. This is essentially turning the dispense on and off throughout the total programmed dispense cycle, until the total volume is achieved.

Servo Drive -Enables dispensing of precision beads and precise dispense volumes. When dispensing a bead, the servo speed (flow rate of material) is correlated to the tool tip speed of the motion platform that presents the product. This allows for variable material flow rate on straight beads, corners or circular paths and prevents “puddling” of material when the robot slows down to change course. When dispensing a specific shot volume, the servo speed can be profiled to allow for slow filling at the beginning of the dispense cycle and faster filling as the part fills with mixed material.

Dual Servo Drive - Enables independent pre-pressure of both A and B side materials, allowing for the best mix of dissimilar materials. Features ability to simply make ratio changes by easily changing ratio demand in control panel.

2K Dispensing Solutions for

  • Aircraft and Aerospace
  • Appliance
  • Battery
  • Construction
  • Electronics and Electrical
  • Filters
  • Lighting and LED
  • Solar and Wind Power

Meter and Dispense 2 Part Materials

  • Polyurethane (PU)
  • Epoxy Resin
  • Acrylic
  • Silicone
  • Methyl Methacrylate (MMA)
  • Thermal Paste

As well as any other precise 2 part materials, including dense and Filled products, from low-high viscosity.

Pro-Meter 2K Series
Model H2K A2K D2K
Drive Type Air-Over-Oil Servo Dual Servo
Metering Principle Positive Rod Displacement
Application Metered Shot (Potting) Metered Shot or Bead
Viscosity Range Liquid to Paste
Ratio Range 1:1 to 10:1
Shot Size Range Up to 221 cc at 1:1 ratio
Variable Flow Rate No Yes Yes
Multiple Shot Output Per Cycle No Yes Yes
Dual Flow Control (A & B) No No Yes
255 Programmable Dispense Volumes Yes
Pro-Meter 2K Series Dispensing Unit.
Metering, Mixing and dispensing applications such as gasketing, potting and robotic bonding.

Enquire Now

Take advantage of our industry expertise.

v