1 & 2 Component Resin Injection Pumping Equipment

Image of resin being injected into wall, next to 4 examples from the resin injection range.

Problems of subsidence on the ground, cracks on the walls and water leaks? our injection systems for resins, for wall injections and to stop water infiltration in order to sanitise, dehumidify and waterproof walls and pavings.

The water infiltration, caused by changes occurred in the groundwater, affect different materials: concrete, masonry of different composition as natural stones, bricks, steel and rock layers of confinement. Injection pumps and resins injecting systems, offer definite solutions which allow to intervene promptly where there’s a problem, related to construction joints, to the connection between vertical and horizontal elements, cracks or defaults.

Pneumatic 2 Component Resin Injection Pumps - 1:1 Ratio

Injection systems with double fluid for two-component products with fixed mixing ratio 1: 1, are ideal for cement injections and to consolidate the foundations. Rehabilitation and waterproofing pumps are used in containment structures (dams, reservoirs, aqueducts, baths, swimming pools and water treatment plants), in underground structures (tunnels, conduits forced, subways and sewers) below water table structures (basements, cellars, garage, elevators and garages).

The 2 part double pumping equipment range covers 2K Ghibli 15:1, 2K Omega 40:1 and 2K Nova 30:1, The air motor is connected to two separate pumps that move simultaneously, drawing up the same volume of material. The pumps are identical models and specifications this ensures an exact 1:1 Ratio Mix for materials of the same physical and chemical characteristics.

The flow of A component and B component is carried through two separate pipes that are connect by a mixing nozzle at the outlet, this ensure an even thorough mix and perfect final curing.

The 2K Ghibli 10:1, available with a heating system, works to the same ratio and mixing principles as the above systems except the two pumps are controlled externally and have two separate air motors.

The version with a heating system is adapted with two pre-heaters at the pumping outlet, this allows for a more even mixture in cold conditions or when using products with high density and/or viscosity.

The 2 component resin injection range with specifications.

Electric & Pneumatic 1 Component Resin Injection Pumps

Iinjection pumps and systems for resins, allow you to fix, fill and seal cracks, crevices, cracks and cavities, by putting an end to infiltration. The used materials are injected with electric and pneumatic pumps, which permeate the cracks. In contact with water or moisture, these materials trigger a reaction that forms a dense and elastic foam that stops the infiltration and seals hermetically the injected slot or cavity.

Our 1 component resin injection range features diaphragm pumps, piston pumps and double diaphragm pumps, each system is robust and offers a constant supply of resin ranging from 1.9 Litres per minute up to 40 Litres per minute.

The 1 component resin injection range with specifications.
Two component external mixing spray gun and two component gun with static mixer.

Take advantage of our industry expertise and contact us with details of your application.

v